LaSeal 732 Acetic High Grade Silicone Sealant
Maikaelelo a magolo
1. Bakeng sa ho koala mamati le lifensetere;
2. Bakeng sa mohaho oohle o amanang le khalase.
Litšobotsi
1.Acid & solidifified; matla a phahameng; ho tiisa ka potlako;
2.ho tiea hantle; ho hanyetsa boemo ba leholimo; e hanyetsanang le ultraviolet;
3.e hanyetsanang le ozone; ha e kene metsi;
4.high le tlaase mocheso hanyetsa
![](https://ecdn6.globalso.com/upload/p/21/image_other/2023-11/6543155ef344113392.jpg)
![](https://ecdn6.globalso.com/upload/p/21/image_other/2023-11/6543156cac32e60628.jpg)
Kopo
1. Mefuta e fapa-fapaneng ea mekhabiso ea ka hare ea likhalase, motsoako oa aluminium le merero ea lisebelisoa tsa khalase
2. Merero e fapaneng ea glazing
3. Ho tiisa le ho tiisa lemati le fensetere ea al-alloy, ka pele ho lebenkele, fensetere ea show, diagonal le skylight corner line
4. Ts'ebetso e ntle ea ho tiisa bakeng sa khalase, fiber ea khalase, letsopa & porcelain le thepa e se nang mafura.
Leqephe la Boitsebiso ba Tekheniki(TDS)
Lintlha tsa Theknoloji: Lintlha tse latelang ke tsa sepheo sa litšupiso feela, ha lia rereloa ho sebelisoa ho hlophisa lintlha
LaSeal 732 Acetic High Grade Silicone Sealant
Teko ea Teko: GB/T14683-2003 《Silicone Building Sealant》
Ntho |
Lintlha |
Mofuta |
Acetoxy |
Density (g/cm3) |
0.98 |
Motsamao wa bokgoni |
±30% |
Nako ea letlalo |
Metsotso e 5-15 |
Nako ea ho omisa (2mm/h) |
8-10 |
Ho omisa(4mm/h) |
18-22 |
Max. Matla a tšepe |
1.3 |
Lebopo le thata |
21 ±2 |
Elongation at Break(%) |
≥500 |
Modulus Mpa(100%) |
0.60 |
Mocheso oa kopo |
-20 ℃ ho +40 ℃ |
Ho hanyetsa mocheso |
-50 ℃ ho +100 ℃ |
sekgomaretsi |
HO LOKILE |
E thibela boemo ba leholimo |
HO LOKILE |
Sekgomaretsi se batang se chesang |
HO LOKILE |
Tlas'a sekhomaretsi sa metsi |
HO LOKILE |
Elastic Recovery Ratio (%) |
96 |
Sekhahla sa tahlehelo ka bongata (%) |
35 |
Nako ea ho omisa letlalo le nako ea ho omisa ka botlalo tlasa: 23 ℃ le 50% mongobo |
Meeli: Sehlahisoa ha se sebetse kopanong ea sebopeho kapa projeke eo thepa ea eona ea motheo e nang le mocheso o kaholimo ho 40 ℃.
Taelo
1.Hloekisa thepa ea motheo ka lesela: e hloekise ka solvent; haeba ho hlokahala ka ho khetheha, koahela bokaholimo ka pente 'me u e tlohele hore e ome ka ho feletseng.
2. Etsa bonnete ba hore o tlatsa sebopeho ka eona 'me ue khomarele ka thata ho thepa ea motheo.
3. Sebetsana le teko ea ho khomarela pele u sebelisoa 'me u netefatse hore ho lumellana hantle le viscosity ea lihlahisoa le lisebelisoa tsa motheo.
Polokelo le shelf bophelo
1.Ba lokela ho sireletsoa metsing, serame le maemo a mabe a moea.
2.Li lokela ho bolokoa li omme 'me li pholile holim'a liphalete tsa lehong pakeng tsa +10 °C le +25 °C maemong a se nang mongobo.
3.Lihlahisoa tse butsoeng li lokela ho jeoa hang-hang.
4.Bophelo ba Shelf bo ka holimo ho likhoeli tse 12 bo itšetlehile ka ho lumellana le maemo a boletsoeng ka holimo a polokelo.
Leqephe la Boitsebiso ba Tekheniki(TDS)
Lintlha tsa Theknoloji: Lintlha tse latelang ke tsa sepheo sa litšupiso feela, ha lia rereloa ho sebelisoa ho hlophisa lintlha
LaSeal 731 Boleng bo Bohareng Acetoxy Silicone Sealant
Ntho |
Lintlha |
Mofuta |
Acetoxy |
Boima ba 'mele (g/cm3) |
0.98 |
Motsamao wa bokgoni |
30% |
nako ea letlalo |
Metsotso e 5-15 |
Nako ea ho omisa (2mm/h) |
8-10 |
Ho omisa(4mm/h) |
18-22 |
Max. Matla a tšepe |
1.3 |
Lebōpo la Hardness A |
21 meqolo 2 |
Elongation at Break(%) |
=500 |
Modulus Mpa(100%) |
0.60 |
Mocheso oa kopo |
-20 C ho ea ho +40 C |
Ho hanyetsa mocheso |
-50 C ho ea ho +100 C |
Sekgomaretsi |
HO LOKILE |
meteo |
HO LOKILE |
Sekgomaretsi se batang se chesang |
HO LOKILE |
ka tlasa sekgomaretsi sa metsi |
HO LOKILE |
Pholiso ea Elastical (%) |
96 |
Sekhahla sa tahlehelo ka bongata (%) |
35 |
Meeli: Sehlahisoa ha se sebetse kopanong ea sebopeho kapa projeke eo thepa ea eona ea motheo e nang le mocheso o kaholimo ho 40 ℃.